how to remove tub spout
- Bathroom
How To: Replace a Tub Spout
Replacing a tub spout is a straightforward project whose necessity arrives sooner or later in the life of most bathrooms.
Photo: shutterstock.com
A tub spout does two things: It provides a decorative cover for the pipe stub delivering water to the bathtub, and it directs the water away from the wall where it could cause damage.
Our spout was more or less failing at both functions. It was severely pitted and judging from the amount of caulk around its base, the spout had a long history of leaking.
For ease of installation and a gap-free fit at the wall, we chose a slip-connection replacement spout. Several types and styles of spouts are available; be sure to select one that complements the design of your shower system.
For example, if you control the shower with a diverter knob, buy a spout with a diverter. If, on the other hand, the diverter is not part of your shower control, buy a spout without a diverter.
Bear in mind that if your replacement spout is one that threads into place, picking up some plumber's tape is a good idea, since wrapping the old threads will ensure a watertight joint.
- Screwdriver
- Razor scraper
- Mini tubing cutter
- Steel wool
- Plumbing grease
- Slip-connection tub spout
How to Replace a Tub Spout
Photo: JProvey
STEP 1
Scrape off old caulk. If there was a gap between the old spout and the wall, the new spout will eliminate it.
Photo: JProvey
STEP 2
Insert a large screwdriver or the handle of a wood hammer into spout, using the tool as a lever to rotate the spout in a counterclockwise direction. Unthread and remove the spout.
Photo: JProvey
STEP 3
Use a tubing cutter (view example on Amazon) to cut the pipe stub to a three- or four-inch length.
Photo: JProvey
STEP 4
Clean the stub with steel wool until it's bright and smooth. Make sure no burrs or sharp edges remain.
Photo: JProvey
STEP 5
Apply a dab of silicone grease (view example on Amazon).
Photo: JProvey
STEP 6
Slide the new spout onto the stub.
Photo: JProvey
STEP 7
Lock the spout in place by tightening the set screw with the supplied Allen wrench.
how to remove tub spout
Source: https://www.bobvila.com/articles/how-to-replace-a-tub-spout/
Posted by: brunsmurdelize.blogspot.com
0 Response to "how to remove tub spout"
Post a Comment